LLM Operations
LLM Operations keeps your language model stack observable, routed and cost controlled. We set up LangFuse observability, deploy LiteLLM routing, audit spend and latency, or run a monthly retainer. These services cover the four offers in this family.
Every engagement starts with a written scope. You approve the smallest correct change before we begin. After delivery, we verify the work and give you the record of what was tested. This page explains what you get, how it runs, who it is for, what it costs and how to start.
What you get
- LangFuse observability setup. We install LangFuse and connect your model calls so each request leaves a trace. The setup includes session grouping, user feedback capture, and cost tracking per request. You get dashboards that show token use, latency, and spend by model. We verify the setup with test traffic before handover and give you the trace IDs to check.
- LLM operations retainer, LiteLLM and LangFuse, monthly. This is a recurring service. We monitor your LiteLLM gateway and LangFuse traces, update routing rules when providers change, and track spend against budgets. Each month you receive a report that lists incidents, configuration changes, cost by model and key, and latency outliers. You can cancel any time and the service runs to the end of the paid period.
- LiteLLM router deployment. We deploy LiteLLM as a single endpoint in front of your providers. The configuration includes fallback order, retries, rate limits, and per-key budgets. We set the environment variables, secrets, and logging hooks, then test failover by forcing provider errors. You get a runbook that explains each routing rule and how to change it.
- LiteLLM cost and latency audit. We review your existing logs, token counts, provider invoices, and response times. The audit looks at which models serve the most tokens, which requests time out, where retries add cost, and whether a cheaper model would meet the same quality bar. The output is a findings list. Each finding states the evidence, the recommended change, and the expected effect. We make no claim the evidence does not support.
- Written scope before any work. The Integrity Standard applies to every job in this family. Before we start, you receive a document that states the exact change, the files or configuration we will touch, and the verification steps. We do not make changes outside the approved scope. If the scope changes, we write it down and get approval again.
- Verification after delivery. Every one-off job ends with a test against the agreed criteria. We run the relevant checks, record the results, and hand you the evidence. If the work fails verification and we cannot make it right, the Refund Policy gives you a full refund within 14 days of delivery.
- Data handling under a clear policy. Your keys, logs, and traces are handled as described in our data security page. We use the smallest access we need, revoke access after the job, and do not retain data longer than required for verification.
How it runs
You send a short description of your stack, the providers you use, and the problem you want to solve. We reply with questions about traffic volume, error rates, budgets, and current tooling. Then we write a scope. The scope is not a generic proposal. It names the exact change, for example a LiteLLM config file edit or a LangFuse environment variable. It lists the verification steps we will run. You approve the scope before any work starts. If you ask for something extra later, we write a new scope and you approve that too.
During the job, we follow the SLA for first response and turnaround. For a one-off setup or audit, we complete the work, run the verification checks, and send you the results. You can then test the change in your own environment. For the monthly retainer, we work continuously. We monitor the gateway and traces, respond to incidents, and send a monthly report. If you cancel the retainer, it keeps running until the end of the period you have already paid for.
If a delivery does not pass verification, we do not call it done. We diagnose the failure, fix the smallest correct change, and verify again. If we cannot make the work right within the agreed window, the Refund Policy applies. You can get a full refund within 14 days of delivery. We do not offer partial credits as a substitute. The refund is the remedy when the evidence does not show the work meets the scope.
Who it is for
- Teams running multiple language model providers behind one API. If you use OpenAI, Anthropic, or open models and need fallback, retries, and budget limits, the LiteLLM router deployment gives you one endpoint and one set of rules.
- Teams with production traffic and no clear view of failures or costs. If you cannot see which requests fail, what users report, or where tokens go, the LangFuse setup adds trace level observability without changing your application logic.
- Teams where LLM spend has grown without a clear reason. The cost and latency audit reviews token counts, provider pricing, and response times, then lists the changes that would reduce cost or latency, with evidence for each.
- Teams that need ongoing operations but do not want a full time hire. The monthly retainer covers monitoring, routing updates, spend tracking, and reporting. It suits small teams that run LLM features in production.
What it costs and how to start
Each service in this family costs between $499 and $1,299. The LangFuse observability setup, the LiteLLM router deployment, and the cost and latency audit are one-off jobs with a fixed price in that range. The LLM operations retainer is a monthly plan and also sits in that range per month. The final price depends on the number of providers, the size of the existing config, and the depth of the audit. We quote in writing after we see your stack.
To start, send your requirements through the contact form. Tell us which of the four services you need and attach any relevant error logs or config excerpts. We reply with a written scope and a fixed price from the range above. You approve the scope, and we begin.
Questions
What does the LangFuse observability setup include?
It includes installation, connection of your model calls, trace ingestion, session grouping, user feedback capture, and cost tracking per request. We verify the setup with test traffic before handover.
Can I cancel the monthly retainer?
Yes. The retainer cancels any time, and the service runs to the end of the paid period. You will not be billed again after cancellation.
What does the LiteLLM cost and latency audit examine?
It reviews your logs, token counts, provider invoices, and response times. It looks for wasted spend, retry overhead, and latency outliers, then lists recommended changes with evidence.
What happens if the work fails verification?
We fix the smallest correct change and verify again. If we cannot make the work right within the agreed window, the Refund Policy gives you a full refund within 14 days of delivery.
How do I start?
Send your requirements through the contact form. We reply with a written scope and a fixed price between $499 and $1,299, and work begins after you approve the scope.
Start with the catalogue
Every service is listed with its price and can be bought without a call. Read the Integrity Standard for how the work is done, the SLA for turnaround, and the Refund Policy for what happens if it is not right. Data handling is documented at Data and access.
Services for this
See all →Ready to start?
Buy it now: LLM operations retainer — LiteLLM + LangFuse, monthly
$499.00
Buy nowSee what is includedAll 180 services
Checkout is self-serve: pay by card through Stripe, confirm by email, and the work is provisioned automatically. No call required. Should you need consultation, click to call (737) 379-9950.



